Product Details
＋BBInfinite BB86 (86.5MM) - DIRECTFIT SHIMANO
BB86-SH-RD-BLK-ASMCT
JUST THE FACTS:
The BBInfinite BB86 DirectFit Shimano bottom bracket works with all Shimano HollowTech road cranksets on the market, from Tiagra to Dura Ace. Our Shimano HollowTech Bottom Bracket ships with the special press tools and retaining compounds you'll need. All you need is the press for this Shimano BB86 PF86 BB.
Why would I choose a 2-Piece bottom bracket system?
Our 2-Piece Bottom Bracket system is for any bike that cannot accommodate our 1-piece unit. What would cause this? Easy; any obstruction that cannot be removed that prevents our 1-piece module from passing from one side to the other in a straight line through the frame bottom bracket shell, which includes:
1) The presence of a hydraulic line that cannot be moved out of the way.
2) An immovable fixture, hump, frame feature, or cable guide.
3) Any wires that cannot be moved out of the way entirely.
Over 90% of the bikes out there can use a 1-Piece module. If you are unsure please email us with the year, make, and model of your frame, along with the crank set model and type, at [email protected], and we’ll get you sorted.
ABOUT OUR BEARING CHOICES:
Ceramitech Bearings: Our Si3n4 hybrid ceramic bearings feature ultra-spherical silicon nitride balls matched to SAE 52100 chrome steel bearing races that have been processed with additional heat treatment and polishing steps.
The result is a hybrid-ceramic bearing that lasts longer than any steel bearing with spin performance no steel bearing can rival. These bearings feature mid-contact seals for extreme performance and endurance. Each bearing comes lubricated with Kluber Isoflex Topas NB52.
MORE THAN EXTREME SPEED AND SILENCE:
BBInfinite DirectFit Shimano bottom brackets maintain optimal chain-lines for crisp, consistent shifting and drivetrain performance. Duel polymer bearing shields seal out dirt and debris while isolating the steel crank spindle from the steel bearing races to eliminate a major source of creaking.
Our 86.5 mm bottom bracket features a Shimano optimized design that's set to the narrowest stance the crank set allows. This ensures that the interface between the non-drive crank arm and the spindle have the maximum amount of spline engagement and Q-factor is as narrow as possible.
POWER METER FRIENDLY
All BBInfinite DirectFit Shimano bottom bracket modules are 100% compatible with all crank-based power meters.
TECHNICAL SPECIFICATIONS
1-Piece Weight: WS2: 67g | CERAMITECH: 68g | ABEC-7 SS: 70g
Frame Width: 86.5mm
Frame Diameter: 41mm
Spindle Diameter: 24mm
2-Piece Weight: WS2: 53g | CERAMITECH: 54g | ABEC-7 SS: 56g
Frame Width: 86.5mm
Frame Diameter: 41mm
Spindle Diameter: 24mm
BB86 (86.5MM) FOR 30MM SPINDLES
BB86-PF-RD-BLK-ASMCT
JUST THE FACTS:
The BBInfinite BB86 for 30mm bottom bracket module or 2-Piece system allows for the efficient use of a 30mm spindle crank set such as a an FSA BB386Evo, EC90, Rotor 3D , Sram/Quarq, and most others.
Our BBInfinite BB86 bottom bracket for 30mm spindle cranks ships fully assembled and packaged with special press tools, retaining compound, instructions, and all necessary hardware.
Why would I choose a 2-Piece bottom bracket system?
Our 2-Piece Bottom Bracket system is for any bike that cannot accommodate our 1-piece unit. What would cause this? Easy; any obstruction that cannot be removed which prevents our 1-piece module from passing from one side to the other in a straight line through the frame bottom bracket shell, which includes:
1) The presence of a hydraulic line that cannot be moved out of the way.
2) An immovable fixture, hump, frame feature, or cable guide.
3) Any wires that cannot be moved out of the way entirely.
Over 90% of the bikes out there can use a 1-Piece module. If you are unsure please email us with the year, make, and model of your frame, along with the crank set model and type, at [email protected], and we’ll get you sorted.
MORE THAN EXTREME SPEED AND SILENCE:
BBInfinite bottom brackets for 30mm spindle crank sets maintain optimal chain-lines for crisp, consistent shifting and drivetrain performance while dishing out trouble-free mile after trouble-free mile.
From the gorgeous, high-luster of our TypeII MilSpec hard anodized finish to the sculpted lines of our One-Piece design that unitizes the bottom bracket structure to eliminate all potential creaks before they start, every aspect of our arcitecture fuses beauty with durability and performnace.
Our 30mm spindle optimized design is set to the widest stance the crank set allows while ensuring that interfaces between crank arm splines and spindle splines have maximum engagement and Q-factor is set as narrow as possible.
POWER METER FRIENDLY
All BBInfinite bottom brackets for 30mm spindle crank sets are 100% compatible with all crank-based power meters. Our flange-less drive-side arcitecture ensures zero interference with protruding power-meter back plates such as those found on Quarqs and SRMs.
TECHNICAL SPECIFICATIONS
Weight: WS2: 71g | CERAMITECH: 73g | ABEC-7 SS: 76g
Frame Width: 86.5mm
Frame Diameter: 41mm
Spindle Diameter: 30mm
WHY DO BBINFINITE BOTTOM BRACKETS SPIN LIKE CRAZY?:
Bicycle frame bottom bracket shells are notoriously misaligned, inconsistent, and out of round, and so it’s inadvisable to use the bike frame as the primary aligning member for bottom bracket bearings. Yet, that’s what our multi-piece bottom bracket competition does, and this explains why their systems frequently fail prematurely and creak.
A BBInfinite OPD (One-Piece-Design) bottom bracket module is a CNC precision-machined hub---like the front wheel hub on your bike---that you press into your frame. And just like your trouble-free wheel hub,
BBInfinite OPD bottom brackets have perfectly aligned bearings regardless of your frame’s BB shell alignment and tolerances. Perfectly aligned bearings are essential for thousands of miles of trouble-free use and extreme spin performance.
WHAT KEEPS BBINFINITE BOTTOM BRACKETS FROM CREAKING?
BBInfinite OPD is the answer for creaking bottom bracket problems as well. Pedaling forces conspire to lever, and rock, and eventually work multi-piece systems loose. The unitized nature of BBInfinite OPD cancels these forces out entirely, which means creaking has no place to start in the first place. It really is that simple.
INSTALLATION IS A SNAP WITH BBINFINITE:
Every BBInfinite module ships with the special press tools, hardware, instructions, and the retaining compound you need to get the job done correctly with ease and confidence. All you need is the press for this BB86 road bike bottom bracket. If you need a press, check out our Master Tool Press.
BB86-SH-RD-BLK-ASMCT
JUST THE FACTS:
The BBInfinite BB86 DirectFit Shimano bottom bracket works with all Shimano HollowTech road cranksets on the market, from Tiagra to Dura Ace. Our Shimano HollowTech Bottom Bracket ships with the special press tools and retaining compounds you'll need. All you need is the press for this Shimano BB86 PF86 BB.
Why would I choose a 2-Piece bottom bracket system?
Our 2-Piece Bottom Bracket system is for any bike that cannot accommodate our 1-piece unit. What would cause this? Easy; any obstruction that cannot be removed that prevents our 1-piece module from passing from one side to the other in a straight line through the frame bottom bracket shell, which includes:
1) The presence of a hydraulic line that cannot be moved out of the way.
2) An immovable fixture, hump, frame feature, or cable guide.
3) Any wires that cannot be moved out of the way entirely.
Over 90% of the bikes out there can use a 1-Piece module. If you are unsure please email us with the year, make, and model of your frame, along with the crank set model and type, at [email protected], and we’ll get you sorted.
ABOUT OUR BEARING CHOICES:
Ceramitech Bearings: Our Si3n4 hybrid ceramic bearings feature ultra-spherical silicon nitride balls matched to SAE 52100 chrome steel bearing races that have been processed with additional heat treatment and polishing steps.
The result is a hybrid-ceramic bearing that lasts longer than any steel bearing with spin performance no steel bearing can rival. These bearings feature mid-contact seals for extreme performance and endurance. Each bearing comes lubricated with Kluber Isoflex Topas NB52.
MORE THAN EXTREME SPEED AND SILENCE:
BBInfinite DirectFit Shimano bottom brackets maintain optimal chain-lines for crisp, consistent shifting and drivetrain performance. Duel polymer bearing shields seal out dirt and debris while isolating the steel crank spindle from the steel bearing races to eliminate a major source of creaking.
Our 86.5 mm bottom bracket features a Shimano optimized design that's set to the narrowest stance the crank set allows. This ensures that the interface between the non-drive crank arm and the spindle have the maximum amount of spline engagement and Q-factor is as narrow as possible.
POWER METER FRIENDLY
All BBInfinite DirectFit Shimano bottom bracket modules are 100% compatible with all crank-based power meters.
TECHNICAL SPECIFICATIONS
1-Piece Weight: WS2: 67g | CERAMITECH: 68g | ABEC-7 SS: 70g
Frame Width: 86.5mm
Frame Diameter: 41mm
Spindle Diameter: 24mm
2-Piece Weight: WS2: 53g | CERAMITECH: 54g | ABEC-7 SS: 56g
Frame Width: 86.5mm
Frame Diameter: 41mm
Spindle Diameter: 24mm
BB86 (86.5MM) FOR 30MM SPINDLES
BB86-PF-RD-BLK-ASMCT
JUST THE FACTS:
The BBInfinite BB86 for 30mm bottom bracket module or 2-Piece system allows for the efficient use of a 30mm spindle crank set such as a an FSA BB386Evo, EC90, Rotor 3D , Sram/Quarq, and most others.
Our BBInfinite BB86 bottom bracket for 30mm spindle cranks ships fully assembled and packaged with special press tools, retaining compound, instructions, and all necessary hardware.
Why would I choose a 2-Piece bottom bracket system?
Our 2-Piece Bottom Bracket system is for any bike that cannot accommodate our 1-piece unit. What would cause this? Easy; any obstruction that cannot be removed which prevents our 1-piece module from passing from one side to the other in a straight line through the frame bottom bracket shell, which includes:
1) The presence of a hydraulic line that cannot be moved out of the way.
2) An immovable fixture, hump, frame feature, or cable guide.
3) Any wires that cannot be moved out of the way entirely.
Over 90% of the bikes out there can use a 1-Piece module. If you are unsure please email us with the year, make, and model of your frame, along with the crank set model and type, at [email protected], and we’ll get you sorted.
MORE THAN EXTREME SPEED AND SILENCE:
BBInfinite bottom brackets for 30mm spindle crank sets maintain optimal chain-lines for crisp, consistent shifting and drivetrain performance while dishing out trouble-free mile after trouble-free mile.
From the gorgeous, high-luster of our TypeII MilSpec hard anodized finish to the sculpted lines of our One-Piece design that unitizes the bottom bracket structure to eliminate all potential creaks before they start, every aspect of our arcitecture fuses beauty with durability and performnace.
Our 30mm spindle optimized design is set to the widest stance the crank set allows while ensuring that interfaces between crank arm splines and spindle splines have maximum engagement and Q-factor is set as narrow as possible.
POWER METER FRIENDLY
All BBInfinite bottom brackets for 30mm spindle crank sets are 100% compatible with all crank-based power meters. Our flange-less drive-side arcitecture ensures zero interference with protruding power-meter back plates such as those found on Quarqs and SRMs.
TECHNICAL SPECIFICATIONS
Weight: WS2: 71g | CERAMITECH: 73g | ABEC-7 SS: 76g
Frame Width: 86.5mm
Frame Diameter: 41mm
Spindle Diameter: 30mm
WHY DO BBINFINITE BOTTOM BRACKETS SPIN LIKE CRAZY?:
Bicycle frame bottom bracket shells are notoriously misaligned, inconsistent, and out of round, and so it’s inadvisable to use the bike frame as the primary aligning member for bottom bracket bearings. Yet, that’s what our multi-piece bottom bracket competition does, and this explains why their systems frequently fail prematurely and creak.
A BBInfinite OPD (One-Piece-Design) bottom bracket module is a CNC precision-machined hub---like the front wheel hub on your bike---that you press into your frame. And just like your trouble-free wheel hub,
BBInfinite OPD bottom brackets have perfectly aligned bearings regardless of your frame’s BB shell alignment and tolerances. Perfectly aligned bearings are essential for thousands of miles of trouble-free use and extreme spin performance.
WHAT KEEPS BBINFINITE BOTTOM BRACKETS FROM CREAKING?
BBInfinite OPD is the answer for creaking bottom bracket problems as well. Pedaling forces conspire to lever, and rock, and eventually work multi-piece systems loose. The unitized nature of BBInfinite OPD cancels these forces out entirely, which means creaking has no place to start in the first place. It really is that simple.
INSTALLATION IS A SNAP WITH BBINFINITE:
Every BBInfinite module ships with the special press tools, hardware, instructions, and the retaining compound you need to get the job done correctly with ease and confidence. All you need is the press for this BB86 road bike bottom bracket. If you need a press, check out our Master Tool Press.
